If your motorcycle has a manual petcock with an off position, you should replace any old o-rings. If your motorcycle has a vacuum operated petcock without an off position, you’ll likely need to replace the vacuum diaphragm. To check and clean your motorcycle petcock: Unscrew the bolts connecting it to the bottom of the gas tank.
How to clean and lube brake caliper slide pins; How to clean and lube brake caliper slide pins. Before using this site please read the site disclaimer. Whether you are investigating why your brakes are dragging/sticking or just doing regular maintenance, cleaning and re-lubricating your brake caliper slide pins should be a quick and easy job.
The Battle of the Bolts was open to all Star’s dealers and had a total of. They trimmed the fender mounts off of the front forks to clean up the look. Star lowering shocks in the rear helped.
· How to Clean Goldwing Motorcycle Carburetors. Updated on January 21, 2019. jbdkz. more.. Remove Air Cleaner Housing Bolts. Remove the two bolts that hold the air cleaner housing in place. See areas circled in the picture. Don’t try to pull it out just yet; there are two hoses attached to it.
Why use bum lube over lithium grease? Unless specified differently in the OEM workshop manual then I use copper grease or loctite on fasteners depending on what I want it to do between now and the next time I want it out (i.e. anything crucial gets loctite, everything not gets copper), lithium grease on anything that moves (spindles etc as copper grease is slightly abrasive), red rubber grease.
THE NEW 2018 PARTS & ACCESSORIES CATALOG FOR YOUR INDIAN ® MOTORCYCLE . 44 pages of parts and accessories for your Indian ® motorcycle.. Hit the view button and start shopping now!
They have had issues over the years, the most egregious of which is probably head bolt stretch causing blown head gaskets. unit that sleeps four and apparently also can carry either a motorcycle or.
De-Rusting a tank with "The Works" Toilet cleaner -Very Easy!. Also using Drywall screws is much better than bolts and other screws IMO, they are quite sharp and cut right through the rust in only a few minutes of shaking.. Every bit of rust was gone and I’ve used the same vat to clean.
motorcycle parts and accessories Harley-Davidson Motorcycle Parts. Hitting the open road on a Harley-Davidson is the epitome of freedom. Replacing worn-out, broken, and degraded parts is a necessary part of maintenance, and things like new foot rests, grips, and lights can help to give a new look to your motorbike.